The instructions seem kind of vauge. The reason mentioned above will be used. I really suck at this Dos stuff! Home Questions Tags Users Unanswered. What is the exact controller that your card uses, the exact numbers from the chip, like in this image? Intel Core i5 K, Disk Drives: I also replaced the SATA cable for the card and things seem to work.

Uploader: Sam
Date Added: 6 July 2014
File Size: 22.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15196
Price: Free* [*Free Regsitration Required]

Marvell Confirms 6-Gbit/s SATA Chip Issue

Same 88SE issue on both PC and same workaround worked on both. I really suck at this Dos stuff! But, having marvell 88se that, if you still want to go on, we will help you to achieve your goal.

Fernando Show info Posts:. Do you have the same trouble or is it just about finding a good firmware? As a result, the SATA card was changed to a different model and everything seemed to work. Hanson, did you ever get your U3S6 working again? Thanks for the reply Hansen, That was the marvell 88se that I 88sse 88se99123 and decided to join the form.

There are also good instructions written how to do it exactly.

Forum – Marvell 88SE Firmware ASUS PCIE GEN2 SATA6G

Marvell 88se with Olin — koblek Do I extract the firmware files on the USB and try them one by one using the list of commands in the read me file? Maybe you find something helpful The only cure worked so far is to disable the NCQ.


After all I have gone through, I shall suggest that if it is working, do not attempt anything on it unless you have the skills and equipment to desolder, reflash and solder again the eeprom chip on your controller. The manual says that it has a Marvell 88SE chip on it. They have 88ee9123 own chip on board.

Information on these models is hard to find for some reason. This command takes effect immediately however it’s not persistent on rebooting so you’ll eventually have to change the boot parameters.

It is my understanding that the card should just work – as the controller is supported by Linux and should hence just work, unfortunately it does not. Zitat von lordkag im Beitrag 13 I could pretend to be upset that he has already forgotten that the autoload is critical and that it differs for external and onboard controllers, but he might not read it with a sense of humor. Spam Netiquette Form other This post contains unwanted Spam. They have an own chip on board My System: But, having said that, if you still want to go on, we will help you to achieve your goal.


Topic settings Subscribe Print view. Hi, please look here and here.

Check that marvell almost doubles the read from the write speed. Sign up using Email and Password. It has a different and dangerous autoload.

SR-2 – Marvell SATA-3 88SE9123 Firmware Updates

As usual I collected dmesg output, one while it was running prior to failure in case someone is interested and marvrll after failure. Then I tried “f16tpn2. Sign up or log in Sign up using Google. By adding this and executing following commands I could get the kernel parameter in grub.

What keys do you use to access the Raid menu?

Yes maybe, the pictures look similar. How do you feel about a broken card? I strongly suggest that you first post the backup image you get when running “go -r”. The issue I face is that the card behaves erratically, dropping a drive from the array